- All Products
- Tile Adhesive
- Plastering
- Skim Coat & Rendering
- Others
QUIKFIX SS - C2TE
25KG / 40KG
QUIKFIX SS (QF-C20) is a high-performance single component thin or medium bed polymer modified cementitious tile adhesive. It is suitable for interior and exterior use in thin or medium bed applications (3mm to 15mm). It is an improved cementitious adhesive (C2) with slip resistant (T) and extended open time (E). It is suitable for both internal and external wall applications over concrete, brickwork rendered surfaces. It is ideal for installing porcelain tiles, homogeneous tiles and mosaics.
QUIKFIX - C1T
25KG
QUIKFIX (QF-C10) is a single component thin bed polymer modified cementitious tile adhesive, specially formulated for small (≤300mm x 300mm) ceramic wall and floor tiles. It is suitable for interior and exterior use in thin bed application (3mm to 10mm). It is an improved cementitious adhesive (C1) with slip resistant (T). Ideal for interior and exterior tiling applications over concrete and rendered surface.
QUIKFIX 999
20KG / 25KG
QUIKFIX 999 (QF-999) is a high quality polymer modified water-resistant cement-based adhesive for use as a key coat (spatter dash) for plastering on smooth concrete surfaces and fixing of ceramic floor & wall tiles. It is suitable for interior and exterior use in thin bed application (3mm to 10mm).
CEMCRETE
25KG
CEMCRETE is designed for grouting tiles on floors and walls for joint width of 5 – 12 mm. It is also used on heavily loaded tiled surface. For grouting light coloured, unglazed tiles and mat-glazed tiles, use only white coloured CEMCRETE to avoid staining. Do not use CEMCRETE for glazed porous tiles joints to avoid scratching of tiles.
WALL KRETE 168
40KG
WALL KRETE 168 is a homogeneous blend of controlled amounts of ordinary portland cement, plasticizing material and air entraining agent, interground to a high fineness to give consistent quality. WALL KRETE 168 is specially designed for interior and exterior plastering, including pebble-dash and rough cast.
MA-88
100 Gram
MORTAR ADDITIVE is a ready to use plasticizing powder additive added into plaster and mortar mixes to increase it’s work-ability and adhesion strength. It is specially formulated as a superior alternative to putty lime or slaked lime for cementitious mixes at site. It is suitable for use in interior and exterior areas such as general purpose repair mortar, wall plastering, floor screeds and masonry mortar for laying brick and block walls.
E-PLAST 77
100 Gram
MORTAR ADDITIVE is a ready to use plasticizing powder additive added into plaster and mortar mixes to increase it’s work-ability and adhesion strength. It is specially formulated as a superior alternative to putty lime or slaked lime for cementitious mixes at site. It is suitable for use in interior and exterior areas such as general purpose repair mortar, wall plastering, floor screeds and masonry mortar for laying brick and block walls.
PREMIUM WALL SKIM
25KG
PREMIUM WALL SKIM (WS-F288) is a premium quality polymer modified water-resistant cement-based finish coat for finishing on wall and ceilings at internal and external application. PREMIUM WALL SKIM (WS-F288) can be used on concrete or rendered surfaces to give a high quality plaster surface suitable to receive painting or wallpaper. PREMIUM WALL SKIM (WS-F288) have a characteristic of better adhesion, flexural strength and abrasion resistance with improved water and weather resistance for exterior finishing application.
SKIM COAT BASE (WHITE)
25KG
QUIKPLASTER BASE (SKIM COAT BASE) is a high quality polymer modified water-resistant cement-based thin plaster for concrete walls or ceilings. It is also good for surface improvement works to block wall and concrete wall surfaces.
SKIM COAT BASE (GREY)
25KG
QUIKPLASTER BASE (SKIM COAT BASE) is a high quality polymer modified water-resistant cement-based thin plaster for concrete walls or ceilings. It is also good for surface improvement works to block wall and concrete wall surfaces.
SKIM COAT FINISH (WHITE)
25KG
QUIKPLASTER FINISH (SKIM COAT FINISH) is a high quality polymer modified water-resistant cement-based thin plaster for finishing on wall and ceilings. It can be used on concrete and rendered surfaces to give a high quality plaster surface suitable for either painting or wallpapering.
SKIM COAT FINISH (GREY)
25KG
QUIKPLASTER FINISH (SKIM COAT FINISH) is a high quality polymer modified water-resistant cement-based thin plaster for finishing on wall and ceilings. It can be used on concrete and rendered surfaces to give a high quality plaster surface suitable for either painting or wallpapering.
BLOCK PLASTER
40KG
BLOCK PLASTER is high quality water-resistant premixed plaster intended for thin plastering and levelling of AAC block wall, plastered or rendered wall or hollow concrete block wall. BLOCK PLASTER can also be used for general filling up and patching. Wall surface that has been levelled with BLOCK PLASTER can be smoothed with FINISHING COAT and painted or wall-papered. Tiles can be fix on surface of BLOCK PLASTER.
ALC RENDER
40KG
ALC RENDER is a high quality polymer modified cement/sand render for application on blockwalls, brickwalls and concrete substrates at internal general area. It is specifically recommended for use as a fine textured sponge finishing for external walls and ceiling to provide an aesthetically pleasant and level wall surface. ALC RENDER recommended to apply key coats or a layer of primer for application onto external wall or smooth concrete surfaces.
RED COLOR CEMENT
20KG
Color Cement is a blend of white or grey ordinary portland cement complying with BS 12 and premium grade pigments complying with BS 1014. The carefully selected pigments that are most colour-fast and light-fast, are ground into the cement to ensure consistency and homogeneity of the finished colour.
GREEN COLOR CEMENT
20KG
Color Cement is a blend of white or grey ordinary portland cement complying with BS 12 and premium grade pigments complying with BS 1014. The carefully selected pigments that are most colour-fast and light-fast, are ground into the cement to ensure consistency and homogeneity of the finished colour.
